I learned how to weave with a floor loom recently. I’m really happy with my latest woven piece , so I made a handwoven tote bag with clear vinyl cover.
Exploring surface design applications and taking an online fundamentals of textile course led me to taking floor loom weaving classes with Lou Grantham at SF Fiber, Oakland. She’s an amazing and inspiring teacher, and it’s really a privilege to learn from her.
On my latest weaving project, I explored textures and shapes in more depth. Lou suggested an advanced pattern called “Cat’s Track” that she learned from a weaving convention in the past.
After a few days of weaving, the result is quite beautiful, perfect to be transformed into a handwoven tote bag. The vinyl covering is added to protect the textile and make the bag water resistant. Finishing touches like handmade bag handles and magnet clasp fastening complete this project.
DIY HANDWOVEN TOTE MATERIALS:
- Two spools of 6/2 unmercerized cotton yarn – for floor loom weaving
- Medium-weight clear vinyl sheets – for covering and lining
- Nylon cord, white cotton remnant, and pink polyester fabric remnants – for bag handles
- Weft interfacing remnant
- Magnet clasp
- Sewing machine (mine is Brother CS6000i model)
- Ivory threads, plus sewing needle (I used Schmetz Universal Needle Size 80/12)
- Clothespins and dressmaker pins
While I cannot succinctly describe the floor weaving steps, I can say with delightful confidence that it was a such a treat to create this textile. As previously mentioned, Lou Grantham at SF Fiber, Oakland is a great teacher and I felt so lucky to learn from her.
After various calculations – from yarn thickness and length to the finished textile’s measurements – were done, I weaved the yarns into an approximately 16″ wide textile, 2 yards long. The finished textile later shrinks to 12.5″ wide after hand washing.
The weaving was done on a 6-pedal floor loom over the course of 4 weeks, 3-4 hours each time.
MAKING THE WOVEN TOTE BODY
Once the woven textile was dry, I sandwiched the finished textile between two layers of clear vinyl and secured them with clothespins.
Then I sewed the edges using a longer-than-usual stitch length (3.5 mm instead of the default 2.5 mm). I made sure to “catch” some of the woven textiles on the sides so that the finished tote is more durable.
The sewing went around all four sides of the woven piece. About 2 – 3 in. of the long warp yarns were encased inside the clear vinyl.
Next step was creating the bag’s side gusset pieces. I cut the excess warp yarns and sandwiched them between two layers of vinyl.
I pinned them sparsely with dressmaker pins on the center before sewing them.
I marked each of the two gusset’s side seams with masking tape this time. After all, I wanted to avoid scarring the clear vinyls as much as possible!
Once all the main pieces were done, I sew them together. The warp yarn gussets were sewed along the sides of the long woven textile. Once again, I used a longer-than-usual stitch length.
One more thing (not pictured): I hand sewn a magnetic clasp near the bag opening on the inside.